Looking after your vehicle’s tyres can reduce fuel consumption, reduce wear and provide better road handling and response. However, many motorists fail to check their vehicle’s tyre pressures on a regular basis, resulting in premature wear and loosing money over time.
The following tips can help you improve MPG and prevent premature wear.
Correct Tyre Pressures
Correct tyres pressures means good fuel economy. When pressures are too low, tyres wear on the outer edges leaving an uneven tread pattern. Overinflation of a tyre will cause it to wear in the middle of the tread. The correct tyre pressure will provide even wear over the life of the tyre. The picture below shows an example of this.

Where can I find the correct tyre pressures for my car?
The vast majority of cars have a sticking on the inside of the driver’s door B pillar which shows the correct tyre pressures for the vehicle. It may also be located inside the fuel filler flap on the inside of the driver’s door. The vehicle’s handbook should also provide the correct tyre pressures.
If you’re in doubt, most passenger cars have a recommended PSI between 31 and 35 when the tyres are cold, and you can set the pressure to this until you car able to ascertain the correct tyre pressure.
Don’t rely on the Tyre Pressure Monitoring System (TPMS)
Most vehicle’s have a Tyre Pressure Monitoring System or ‘TPMS’ fitted. When a tyre pressure drops, the TPMS warning lamp illuminates to alert the driver of a possible problem. However, you should never solely rely on this system and it is recommended that you check your tyre pressures with a reliable tyre gauge at lease once a month (more regularly if you cover a high mileage). Commercial vehicles may require a much higher tyre pressure and you should contact your vehicles manufacturer for further advice.
Wheel alignment
Wheel alignment (sometimes called ‘tracking’) is a key part of vehicle maintenance which ensures the smooth running and control of your vehicle. It prevents tyre wear and improves the overall performance of your car by ensuring that all four wheels are parallel with each other, correctly positioned relative to the road, and accurately aligned with the steering wheel.
Having an incorrect wheel alignment can cause your tyres to wear more quickly and make it difficult to control your vehicle properly. That’s why it is essential to have regular wheel alignment checks as part of your routine maintenance plan. With regular wheel alignment, you can expect improved handling and fuel efficiency while keeping tyre wear at a minimum.
Tread depth
The legal minimum tread depth for car tyres in the UK is 1.6mm. This must be the case for the middle 3/4 of the tyre.
Tyre tread depth is important for safety as it affects how well your tyres grip the road. Tyres with less tread depth are more likely to aquaplane (slip on a wet surface) and skid. They are also more likely to overheat and burst.
It is important to check your tyre tread regularly and replace your tyres if they are worn down to the legal minimum. You can check your tyre tread depth by using a tyre tread depth gauge.
If you are caught driving on tyres with less than 1.6mm tread depth, you could be fined £2,500 for each tyre. You could also receive three penalty points on your driving licence.
Don’t use a cheap tyre gauge
Cheap plug-in tyre pumps are often inaccurate and unable to inflate a tyre to a high pressure.
